Fill the Turbo Cell to the top with the solution and let soak for 15 minutes. Before filling Turbo Cell with muriatic acid solution, place a container underneath to avoid any spills.
Fasten the Turbo Cell to Cell Cleaning Stand with the cord side down. Caution: ALWAYS ADD ACID TO WATER – NEVER ADD WATER TO ACID.Ĥ. In a clean plastic container, mix a 4:1 solution of water to muriatic acid (one gallon of water to one quart of acid). Be sure to wear rubber gloves and appropriate eye protection. Note: do not Use a mild acid wash when flushing and scraping will not remove the majority of deposits. If this is not successful, use a plastic or wood tool to scrape the deposits off the plates. If deposits are seen, use a high pressure garden hose to flush the scale off. If no deposits are visible, reinstall the cell.ģ. Once removed, look through the cell and inspect for scale formation (light colored crusty or flaky deposits) on the plates and for debris that is caught on the plates.
Turn off the power to the system and deactivate the pool pump before removing the Turbo Cell.Ģ.
